About a year ago my brother in law gave me a Morley PWA wah pedal. The pedal had gotten damp at one point and now it doesn’t work. I don’t know a thing about repairing circuits but to save me from buying another wah pedal I am determined to learn how. I’ve looked the circuit board over and there are two capacitors or transistors or something (I don’t know what they’re called, like I said I’m still learning) that look to be messed up. I’ve circled the two suspect pieces red in the picture. If anybody could help me out with some info I could really use it.
-
Morley PWA wah repair part 3
13 December 2007 11:50 PM | 2 CommentsI got the parts to repair the pedal today. After soldering them onto the board I hooked everything up but get no wah. There is one more capacitor that I think needs to be replaced but it will have to wait. I need to think...
Read More -
Morley PWA wah repair part 2
08 December 2007 12:47 AM | No CommentsI just ordered the parts I think I need from radio shack. I should have went to the store because the bill came up for over $8, most of it was shipping though. The parts are a 1N4003 diode and a 220uf 35v cap. I’ll...
Read More -
Proview LCD monitor repair part 5 (a failed mission)
15 March 2008 11:16 AM | No CommentsBad news as far my luck goes on this repair. I changed out one 220uf capacitors. I could only change one because that’s how many my local Radio Shack had left. I did get enough 10uf capacitors to replace the old ones on the video...
Read More -
Proview LCD monitor repair part 3
11 March 2008 10:10 PM | No CommentsYesterday I went to Radio Shack and bought 2 of the 470uf capacitors. They didn’t have any of the other ones. As a side note I was told that there were 6 470uf capacitors when on my board there are only 2. The 4 680uf...
Read More -
Proview LCD monitor repair part 4
12 March 2008 9:23 AM | 1 CommentI pulled the monitor apart again today. This time I pulled both power supply board and the video board. I looked for dry solder and sure enough I found some. The video board looked like it had alot of dry solder. I desoldered all the...
Read More
I'm an amature songwriter. Music I've writen has been on albums all across the United States, Europe and Africa. 
